Serving the Portland area  ·  (971) 754-2587  ·  Open Mon-Sun 7am-7pm
📞 (971) 754-2587 Free Quote

Metal Roofing in Canby, OR (97013) · Local Professionals

Portland Metal Roofing · Fast response in Canby and the Portland area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+181Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Canby still feels like a farm town, and that's exactly why metal roofing fits here. Between the older bungalows and farmhouses near downtown and the barns, shops and outbuildings on the acreage off Knights Bridge Road and South Mulino Road, we see a lot of roofs that take a beating from rain, moss and falling limbs.

Homeowners in 97013 call Portland Metal Roofing because we understand both sides of Canby: the tight in-town lots near Wait Park and the long gravel driveways out past the high school. Whether it's a standing seam roof on a newer farmhouse or a repair on a 1950s ranch, we show up, get on the roof and give you a straight answer.

Metal Roofing in Canby (97013)

Canby sits in the Willamette Valley where the rain comes steady from October to May, and the tree cover around town (bigleaf maples, Douglas firs, cedars) drops needles and leaves that hold moisture on shaded roof slopes. That's the main reason we see moss, algae and fastener failures on older roofs here. Out on the farms and acreage, metal roofs on barns and workshops take wind and debris, and the low-pitch roofs on machine sheds and shops need panels that shed water fast. In town, the older homes near the Canby Ferry and along NW 1st Avenue often have steep gables and small dormers, so flashing details around chimneys and sidewalls matter more than the panel itself. We also deal with the occasional ice dam at the eaves on the higher ground toward the foothills, and wind-lifted panels after the east winds that come through the valley.

Our team has worked on metal roofs across Canby and the surrounding Portland area for years. We know which streets have tight access for a lift, which older homes have layers of shingles that need to come off before we can install, and how to handle the permits through the city. We're fully insured with general liability and workers' compensation, and we treat every property like it's our own.

Our services in Canby

How a Job Works in Canby

Step 1: You call us at (971) 754-2587 or fill out our form, and we set up a free on-site assessment. We'll walk the roof, check the attic if accessible, look at the flashing, fasteners and any signs of leaks, and talk through what you're trying to solve. You get a written estimate with options, no pressure.

Step 2: Once you approve, we schedule the work and pull the permits with the city of Canby. On older in-town lots, we plan for narrow driveways and keep materials organized so we don't block neighbors. On farm properties, we coordinate around equipment and animals. We protect landscaping and keep the site secure each day.

Step 3: When the job is done, we clean up thoroughly, haul away old materials and walk the roof and gutters with you. We don't leave until you're satisfied and we've shown you exactly what we did.

Pricing in Canby depends on the roof size, pitch, access and condition. For a typical ranch or bungalow, metal roof installation starts around $8 per square foot, standing seam starts at $10, and metal roof replacement starts at $9. If you're retrofitting over existing shingles, that starts at $7 per square foot, but keep in mind local code limits how many layers you can go over. Repairs like leak fixes start at $450, screw replacement and re-fastening starts at $750, and flashing or chimney repair starts at $600. Coating and painting starts at $2.50 per square foot. For a free estimate on your Canby property, call (971) 754-2587.

My barn off Knights Bridge Road has an old corrugated roof with leaks. Can you match the existing panels or do I need a full replacement?
We can often source matching corrugated or R-panel profiles for barns and shops, but if the panels are rusted through or the purlins are compromised, a full replacement is usually more cost-effective. We'll inspect the structure and give you both options.
A storm just took off some panels on my roof in Canby. How fast can you get out?
We prioritize storm and wind damage calls in Canby and the surrounding area. Call us at (971) 754-2587 and we'll schedule a free inspection as soon as possible, often within a day or two depending on demand. We can tarp or secure the roof to prevent further damage.
What's a realistic budget for a metal roof on a 1,500 square foot ranch in Canby?
For a basic corrugated or ribbed panel roof, you might be looking at $5.50 to $8 per square foot installed, so roughly $8,000 to $12,000 depending on pitch and removal of old roofing. Standing seam would be higher, starting around $10 per square foot. We'll give you a precise quote after inspecting.
Do I need a permit from the city of Canby to replace my roof?
Yes, a roofing permit is typically required for a full replacement or re-roof in Canby. The exact requirements and fees vary, so we always confirm with the city building department before starting work. We handle the permit application as part of our service.
My neighbor's tree branches hang over my roof. Can I trim them, and does my HOA need to approve a metal roof color?
You generally have the right to trim branches that overhang your property line, but it's best to talk with your neighbor first. If you're in an HOA, check the covenants for approved roofing materials and colors before you order. We can provide product samples and documentation to help with the approval process.
Are you fully insured for work on my Canby property?
Yes, we carry general liability insurance and workers' compensation coverage for all our crews.
What should I do to maintain my metal roof in Canby's rainy climate?
Keep gutters and valleys clear of needles and leaves, especially if you have firs or maples nearby. Twice a year, check for moss growth on shaded slopes and remove any debris. We offer inspections and coating services to extend the life of your roof. Call us at (971) 754-2587 to schedule a maintenance check.
Why choose us?

Trusted professionals in Portland

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Portland

All your work handled by qualified professionals in Portland

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

181+ Verified Client Reviews in Portland

⭐⭐⭐⭐⭐ 4.9/5 · 181 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Portland · Response within 24h · No commitment · ☎ (971) 754-2587

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Portland ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm