Serving the Portland area  ·  (971) 754-2587  ·  Open Mon-Sun 7am-7pm
📞 (971) 754-2587 Free Quote

Metal Roofing in Gresham, OR (97030) · Local Professionals

Portland Metal Roofing · Fast response in Gresham and the Portland area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+181Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Gresham is a city of practical, hardworking homes. The 1960s to 1990s ranches and split-levels that line streets off Burnside and Division were built for families, not for the wind that funnels through the Columbia Gorge or the moss that thrives in our wet winters. Up toward the foothills near Mt. Hood Community College and beyond, the lots get steeper and the weather gets a little more serious.

That is where we come in. Portland Metal Roofing has been installing, repairing, and replacing metal roofs across Gresham and the surrounding Portland area for years. We know the older shingle roofs near downtown Gresham and the newer builds out toward Hogan Butte, and we know what our rain, wind, and occasional snow do to them. If you are in 97030 and your roof is telling you it is time, call us at (971) 754-2587.

Metal Roofing in Gresham (97030)

Gresham sits at the edge of the Willamette Valley, where the flat ground starts to roll up toward the Cascades. That means two things for your roof: wind and water. The east wind coming out of the Gorge can lift shingles and work screws loose on older roofs, especially on open lots near the fairgrounds or along the higher ridges. And with about 36 inches of rain mostly from October to May, moss and algae love the shaded north slopes of the ranch homes that make up so much of Gresham's housing stock. We see a lot of failed fasteners, separated seams, and flashing gaps that have been leaking quietly for years.

Our team handles the full range of metal roofing here: standing seam for a clean, modern look, metal shingles and stone-coated steel that mimic the shake and slate profiles common on Gresham ranches, and corrugated or ribbed panels for barns, workshops, and agricultural buildings out toward the Sandy River delta. We also specialize in metal roof over shingles (retrofit) for homeowners who want the durability of metal without the cost and mess of a full tear-off. If you are up in the foothills where a few snows a year hit hardest, we install snow guards and ice protection to keep snow from sliding off and taking your gutters with it.

We are fully insured with general liability and workers' compensation, and we pull the proper permits for every job. Roofing permits are commonly required for a full replacement or re-roof in Gresham, and thresholds and fees vary, so we always check with the city before we start. You can find the official city site at Gresham's official city website if you want to look into local rules yourself.

Our services in Gresham

How a Job Works in Gresham

Step 1: It starts with a phone call to (971) 754-2587 or a request through our site. We schedule a free on-site assessment at your Gresham property, whether you are in a ranch off Powell Boulevard or a two-story near Gresham Station. We look at the roof, the flashing, the gutters, and the attic if we can, and we give you a straight answer about what we see and what it will cost. No pressure, no sales pitch.

Step 2: Once you approve the estimate, we handle the permit and schedule the work. In Gresham, tight lots and steep driveways are common, especially in the older neighborhoods, so we plan for where the dumpster goes and how we will get materials to the roof without tearing up your landscaping. If you are in an HOA, we can coordinate on panel profile and color before anything is ordered. Most residential metal roof installations take a few days to a week, depending on the size and complexity of the roof.

Step 3: When the work is done, we clean up. We magnet-sweep the yard and driveway for nails, haul away all debris, and walk the finished roof with you so you can see the seams, the flashing, and the fasteners for yourself. We do not leave until you are satisfied and you know how to reach us if anything comes up later.

Pricing for metal roofing in Gresham depends on the size of your roof, its pitch and access, the condition of the existing roof, and how soon you need it done. As a ballpark, metal roof installation starts around $8 per square foot, standing seam runs from about $10 per square foot, and a full metal roof replacement starts around $9 per square foot. If you are retrofitting over existing shingles, that starts around $7 per square foot. Repairs and leak fixes start at $450, screw replacement and re-fastening starts at $750, and flashing, chimney, or skylight repair starts at $600. We always give you a written estimate before any work begins, and we are happy to walk you through the numbers. Call (971) 754-2587 for a free estimate.

My ranch home in Gresham has moss growing on the north side of the roof. Is that a sign I need a new roof or just a cleaning?
Moss on a shaded north slope is common here because of our wet winters and the tall firs that overhang many Gresham lots. Sometimes it is just surface growth, and a cleaning and treatment will take care of it. But moss holds moisture against the shingles or panels, and on older roofs it often means the underlying material is already failing. We will inspect the roof and tell you honestly whether a repair or replacement makes sense.
A windstorm just peeled back some panels on my roof near the Gorge. Can you come out today?
Yes. Wind-lifted and peeled panels are one of the most common storm calls we get in Gresham, especially on exposed lots. Call us at (971) 754-2587 and we will get someone out to secure the roof and prevent further water damage. We offer free inspections for storm and wind damage.
What does a metal roof cost for a typical 1,500 square foot ranch in Gresham?
For a ranch that size, a basic corrugated or ribbed panel roof might start around $5.50 per square foot, while standing seam would be closer to $10 per square foot. The exact price depends on the pitch, the number of penetrations like chimneys and vents, and whether we are tearing off the old roof or retrofitting over it. We give free estimates so you can see the real numbers for your home.
Do I need a permit to replace my roof in Gresham, and who handles it?
In most cases, yes, a roofing permit is required for a full replacement or re-roof in Gresham. The rules and fees vary depending on the scope of work and the jurisdiction, so we always verify with the city before we start. We handle the permit application and inspections as part of the job, so you do not have to worry about the paperwork.
My neighbor's tree branches hang over my roof. Can I trim them, and will my HOA care about the color of my new metal roof?
You generally have the right to trim branches that cross onto your property, but it is always best to talk with your neighbor first. For HOA rules, many subdivisions in Gresham have design review that can restrict panel profiles and colors, so we recommend checking with your HOA before you choose a material. We can help you find a profile that meets the rules and still looks good.
Are you insured for work on my property?
Yes, we are fully insured. We carry general liability insurance and workers' compensation coverage for every job we do in Gresham and the surrounding area. We are happy to provide proof of insurance before we start.
What maintenance does a metal roof need in Gresham's climate?
Metal roofs are low maintenance, but they are not maintenance-free. In our wet climate, we recommend an annual inspection in the fall to check for loose fasteners, debris buildup in the gutters, and any signs of moss or algae on shaded slopes. Keeping needles and leaves off the roof, especially under overhanging firs, will help it last. If you are in the foothills, check the snow guards before winter.
Why choose us?

Trusted professionals in Portland

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Portland

All your work handled by qualified professionals in Portland

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

181+ Verified Client Reviews in Portland

⭐⭐⭐⭐⭐ 4.9/5 · 181 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Portland · Response within 24h · No commitment · ☎ (971) 754-2587

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Portland ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm