Serving the Portland area  ·  (971) 754-2587  ·  Open Mon-Sun 7am-7pm
📞 (971) 754-2587 Free Quote

Metal Roofing in Oregon City, OR (97027) · Local Professionals

Portland Metal Roofing · Fast response in Oregon City and the Portland area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+181Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Oregon City sits right where the Willamette meets the Clackamas, and the housing stock shows it: 1900s Craftsman bungalows on the hillside streets, mid-century ranches down along the flats, and newer two-story subdivisions up on the bluffs. The terrain is steep in places, the trees are tall, and the weather is real Willamette Valley: wet winters, dry summers, and moss that never really quits.

Homeowners in 97027 call Portland Metal Roofing because we know what these roofs go through. From the historic homes near the McLoughlin Promenade to the newer builds off Beavercreek Road, we have seen the wind, the rain, and the needle litter that wears down a roof.

Metal Roofing in Oregon City (97027)

Oregon City is not flat, and that matters for roofing. The hillside homes near the Oregon City Municipal Elevator and along High Street have steep pitches and tight lots, which means staging materials takes planning and sometimes a little creativity. Down along the Clackamas River and in the older neighborhoods off Main Street, you get mature Douglas firs and bigleaf maples that drop needles and leaves all year, feeding moss on shaded roof slopes. Up on the bluffs, the newer subdivisions off Holcomb Boulevard and Beavercreek Road catch more wind and see more sun, so UV degradation and wind-lifted panels are the concerns there. The soil is clay-heavy in spots, so drainage around the foundation matters as much as the roof itself. We account for all of it: the grade, the access, the tree cover, and the way water actually moves off your property.

Our team has worked across Oregon City and the surrounding Portland area for years, from historic homes that need careful flashing work to farm buildings out toward Carver and Beavercreek. We know the local building department, we know what inspectors look for, and we know how to protect your landscaping while we work.

Our services in Oregon City

How a Job Works in Oregon City

Step 1: You call us at (971) 754-2587 or request a free estimate online. We schedule an on-site assessment at your Oregon City property, and we show up when we say we will. We walk the roof, check the flashing, the fasteners, the valleys, and the attic if accessible, and we give you a written estimate with options. No pressure, no surprises.

Step 2: Once you approve, we pull the permits (roofing permits are commonly required for a full replacement in Oregon City, and thresholds vary, so we verify with the local building department). We schedule the work around weather and access. On tight hillside lots, we plan material delivery carefully so we do not block neighbors or damage driveways. If your home is in a historic district or an HOA, we coordinate the design review and color approval before we order materials.

Step 3: When the job is done, we clean up completely. We magnet-sweep for nails, haul away all debris, and do a final walkthrough with you to make sure you are satisfied. We do not leave until your property is clean and your questions are answered.

Pricing for metal roofing in Oregon City depends on the size and pitch of your roof, the material you choose, access, and the condition of the existing roof. As a ballpark, metal roof installation starts at $8 per square foot, standing seam starts at $10 per square foot, and metal roof replacement starts at $9 per square foot. If you are retrofitting over existing shingles, metal roof over shingles starts at $7 per square foot, but keep in mind that code limits how many layers you can have. Repairs start at $450, and screw replacement and re-fastening starts at $750. Flashing, chimney, and skylight repair starts at $600. We give free estimates, so call (971) 754-2587 and we will give you a clear, written price for your specific roof.

My house is on a steep hillside lot near the McLoughlin Promenade. Can you handle the access and staging?
Yes. We work on hillside homes in Oregon City all the time. Steep lots often mean we need to plan material delivery carefully, sometimes using a conveyor or crane, and we may need to stage materials on the street or in the driveway. We will assess access during the free estimate and explain exactly how we will handle it without damaging your landscaping or blocking neighbors.
A windstorm just lifted some panels on my roof off Beavercreek Road. How fast can you respond?
We offer storm and wind damage repair with free inspections. Call us at (971) 754-2587 and we will schedule an inspection as soon as possible. If there is an active leak, we can often provide temporary protection the same day or next day, depending on scheduling. We document the damage for your insurance claim and provide a written estimate for the repair.
What does a typical metal roof replacement cost for a 1,500 square foot ranch in Oregon City?
For a 1,500 square foot ranch with a low-pitch roof, a basic corrugated or ribbed panel roof might start around $5.50 per square foot, while standing seam would be closer to $10 per square foot. So you are looking at roughly $8,000 to $15,000 depending on material, removal of old roofing, and any needed repairs. We give free estimates and will give you a precise number after inspecting your roof.
Do I need a permit to replace my roof in Oregon City, and how long does it take?
Roofing permits are commonly required for a full replacement or re-roof in Oregon City, and the requirements vary by jurisdiction. We always verify with the local building department before starting work. Permit timing can take a few days to a couple of weeks depending on the scope and current workload. We handle the paperwork and schedule inspections so you do not have to.
My neighbor says my new metal roof will increase runoff onto their property. What are the rules?
Property line drainage is a common concern in Oregon City, especially on hillside lots. In general, you are responsible for directing water from your roof so it does not damage neighboring property. We design gutter and downspout systems to manage runoff properly, and we can often route water to a dry well or drainage area on your own property. If you are in an HOA, check the covenants for any additional rules. We can help you coordinate with neighbors if needed.
Are you fully insured for work at my Oregon City home?
Yes. We carry general liability insurance and workers' compensation coverage for all our crews.
What maintenance does a metal roof need in Oregon City's climate?
In Oregon City, the main issues are moss, algae, and needle litter from the big firs and maples. We recommend an annual inspection, especially in the fall before the rainy season, to clear debris from valleys and gutters. Every few years, a gentle wash can help prevent moss buildup. We also check fasteners and seals, since temperature swings can loosen screws over time. Regular maintenance will keep your metal roof performing for decades.
Why choose us?

Trusted professionals in Portland

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Portland

All your work handled by qualified professionals in Portland

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

181+ Verified Client Reviews in Portland

⭐⭐⭐⭐⭐ 4.9/5 · 181 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Portland · Response within 24h · No commitment · ☎ (971) 754-2587

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Portland ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm