Metal roofing prices in Portland vary based on material, roof complexity, and project scope. Whether you need installation, repair, or replacement, understanding these factors helps you budget with confidence, and Portland Metal Roofing offers transparent starting prices to guide you.
Pricing guide
These rates are indicative. Every job is unique: size, access, complexity. Request a free estimate for exact pricing tailored to your situation.
| Service | Price | Details |
|---|---|---|
| Metal Roof Installation | From $8/sq ft | Complete metal roof installation for homes across Portland and the Willamette Valley: panel systems engineered for months of rain, moss growth and winter wind, installed over high-temperature synthetic underlayment with proper attic ventilation, flashing and manufacturer-approved details for a 40-60 year service life. |
| Standing Seam Metal Roofing | From $10/sq ft | Concealed-fastener standing seam systems, the premium choice for Portland homes. Panels roll-formed to length and mechanically seamed or snap-locked, with no exposed screws for rain to find as the seasons expand and contract the roof. Strong wind resistance and a surface that sheds moss-feeding debris easily. |
| Metal Roof Replacement | From $9/sq ft | Full tear-off and replacement of moss-streaked shingle, rotted-deck or end-of-life metal roofs: old roofing hauled away, decking inspected and repaired, then a complete new metal system installed. Some insurers recognize impact-rated roofs, so ask yours. |
| Metal Roof Over Shingles (Retrofit) | From $7/sq ft | A new metal roof installed directly over your existing asphalt shingles, with no tear-off, less waste and lower cost. Popular on Portland ranch homes. We check deck condition first and tell you honestly when tear-off is the better call, especially after years of moisture. |
| Metal Roof Repair | From $450 | Repair of damaged, loose or storm-hit metal roofing: replacing limb-dented or punctured panels, resealing seams and penetrations, and fixing failed flashing before steady rain becomes interior damage. |
| Metal Roof Leak Repair | From $450 | Priority leak response for metal roofs: leaks traced to their true source (failed fasteners, seam separation, flashing gaps, pipe boots and chimney transitions) and fixed right, not just caulked over. Emergency tarping available after windstorms. |
| Screw Replacement & Re-Fastening | From $750 | Portland's wet winters and dry summers expand and contract metal roofs hundreds of times a year, so screws back out and aging washers crack on older exposed-fastener roofs, letting rain in. Oversized screws and weather-resistant washers fix it for a fraction of replacement cost. |
| Corrugated & Ribbed Panel Roofing | From $5.50/sq ft | Exposed-fastener metal roofing (corrugated, R-panel and 5V), the budget-friendly workhorse for carports, porches, barns and workshops across the Tualatin Valley and the farms around Portland. Quality panels in lasting colors, installed with proper screw patterns and closures that keep out wind-driven rain. |
| Metal Shingle Roofing | From $9/sq ft | Metal shingles that deliver the look of architectural shingles, slate or shake with the lifespan of steel, a favorite for Portland homeowners who want metal performance without the standing seam look. Lightweight, wind-rated and moss-resistant on shaded slopes. |
| Stone-Coated Steel Roofing | From $9/sq ft | Stone-coated steel systems combining steel strength with a textured traditional finish: strong wind performance, Class A fire rating, and shake and slate profiles that suit the Craftsman, Tudor and ranch homes common around Portland, at a fraction of the weight. |
| Copper & Specialty Metal Roofing | From $20/sq ft | Copper, zinc and aluminum roofing for accents, porches, bay windows and full architectural roofs: premium metals that develop a living patina and hold up for generations in the Pacific Northwest damp. Custom fabrication for the fine details. |
| Metal Roof Coating & Painting | From $2.50/sq ft | Restoration of faded, chalking or surface-rusted metal roofs: surface prep, moss and algae removal, rust treatment and high-performance coating systems that extend roof life 10-15 years and restore color without replacement. |
| Flashing, Chimney & Skylight Repair | From $600 | Repair and custom fabrication of flashing around chimneys, skylights, valleys, dormers and wall transitions, the number one leak point on Portland roofs once the fall rains arrive. In-house bent flashing for a precise watertight fit. |
| Snow Guards & Ice Protection | From $1,200 | Snow guards and rail systems for metal roofs: rarely needed on Portland's valley floor, but useful in the West Hills, Gresham foothills and Cascade-edge towns and on steep roofs over entries where an occasional snow or ice storm slides off at once. Honest guidance on whether yours needs them. |
| Storm & Wind Damage Repair | Free inspection | Repair of wind, limb and ice-storm damage to metal roofing: thorough documentation with photos, honest assessment of repair versus replacement, and help documenting your insurance claim from inspection to completed work. |
| Metal Roof Inspection | Free estimate | Complete metal roof inspections for homeowners, buyers and insurance requirements: fastener condition, seam integrity, flashing, coating, moss and algae wear, and a straight answer on remaining service life with a written report. |
| Gutters for Metal Roofs | From $9/linear ft | Seamless gutter systems sized and mounted correctly for metal roofing: hangers that work with panel profiles and downspouts that carry months of steady rain and fir-needle litter away from siding and foundations, with details that stay clear of debris. |
| Commercial & Agricultural Metal Roofing | Free estimate | Metal roofing for barns, workshops, churches, carports and light commercial buildings across the Portland metro, from Tualatin Valley farms and orchards to Gresham shops and Hillsboro light-industrial buildings, with durable panel systems, insulation options and repairs. |
What Affects the Price
- Roof size and complexity : Larger roofs and those with multiple slopes, valleys, or penetrations require more materials and labor, increasing the overall cost.
- Material type and gauge : Standing seam, copper, and stone-coated steel cost more than corrugated panels due to material expenses and specialized installation.
- Accessibility and roof height : Steep pitches, multi-story homes, or limited access may require additional safety equipment and labor, raising the price.
- Additional services and repairs : Services like leak repair, flashing, or snow guards add to the cost, as does the extent of damage or need for structural repairs.
What's included
- Travel included across the Portland area
- Professional labor & equipment
- Old roofing tear-off & haul-away
- Job site cleanup
- Written estimate before work begins
To get an accurate estimate, gather your roof's dimensions, material preferences, and any known issues before calling Portland Metal Roofing at (971) 754-2587. Their estimates typically include a detailed scope of work, material costs, and labor, ensuring transparency. Schedule a free inspection to discuss your project and receive a written quote.
Pricing FAQ
Why do metal roofing prices vary so much?
Prices vary due to material type, roof complexity, labor, and additional services. For example, copper roofing costs more than corrugated panels, and roofs with many penetrations require more labor. Portland Metal Roofing provides itemized estimates to clarify costs.
How can I get a free estimate or schedule an appointment?
Call Portland Metal Roofing at (971) 754-2587 to schedule a free inspection and estimate. They will assess your roof and provide a detailed quote with no obligation.
What payment methods do you accept, and are financing options available?
Portland Metal Roofing accepts various payment methods, including credit cards and checks. Financing options may be available; contact them at (971) 754-2587 to discuss flexible payment plans tailored to your needs.